Akai MPC1000 User Manual

OMNI- A The MPC1000 will output the incoming MIDI data as it is from MIDI OUT A.
OMNI- B The MPC1000 will output the incoming MIDI data as it is from MIDI OUT B.
OMNI- AB The MPC1000 will output the incoming MIDI data as it is from both MIDI OUT A and B.
Setting the MIDI input
Normally, the MPC1000 can receive the incoming MIDI data regardless of the MIDI channel, so you do not have to
worry about the MIDI channel of the connected MIDI devices. You can change the setting to receive only the data
on a specific MIDI channel.
01. Select the MIDI/SYNC mode by pressing the [MODE] key and hitting the [PAD 9]
(MIDI/SYNC).
02. Press the [F1] (MIDI) key.
The MIDI page will be displayed.
03. Select the Active track receive channel field and select the MIDI channel from which
you wish to receive the data.
If you set this field to ALL, the MPC1000 will receive all channels. If you select any channel from 1 to 15, the
MPC1000 will receive only the selected channel.
Using the MPC1000 with external devices
-47-

Akai MPC1000 Specifications

General

Pads	16 velocity and pressure-sensitive pads
Polyphony	32 voices
Sampling Frequency	44.1 kHz
Bit Depth	16-bit
Power	12V DC
Memory	16 MB (expandable to 128 MB)
Storage	CompactFlash card slot
Sequencer Resolution	96 PPQN
Sample Format	WAV
Filter	2-pole resonant filter per voice
Effects	2 stereo effects processors
Display	240x64 backlit LCD
Inputs	2 x 1/4" line inputs
MIDI	In, Out, Thru
USB	USB 1.1
Sequencer	64-track