Changing the order of tracks (TRACK MOVE)
When you are creating a song by combining several short sequences, normally you would use the SONG feature to
play back sequence in the specified order. The MPC1000 can convert the song data with short sequences to one
long sequence. To do this, you need to arrange the order of the tracks in each sequence. In this section, you will
learn how to use the track move function that allows you to change the order of the tracks in a sequence.
You can set the track move in the TrMOVE (Track move) page of the SEQ EDIT mode, which can be accessed by
pressing the [MODE] key and then the [PAD 13].
01. In the SEQ EDIT mode, press the [F3] (TrMOVE) key.
The TrMOVE (Track move) page will be displayed.
02. In the Sq field, select the track that you wish to change the order.
03. In the Reference sq field, select the sequence to be used as the reference when
changing the order.
For example, if you want other tracks to follow the order in sequence 01, you should select sequence 01 in
the Reference sq field.
04. Using the down cursor key, move the cursor to the track list.
05. You can scroll through the list by turning the DATA wheel.
Select the track that you wish to move.
06. Press the [F6] (SELECT) key.
This selects the track.
To select a track again, press the [F5] (CANCEL) key.
07. Select the destination by turning the DATA wheel.
The list will scroll with the track selected in steps 5 and 6 fixed.
Refer to the list on the left to select the destination position.
08. Press the [F6] (MOVE) key.
The track will move to the selected location and the order will be changed.
To Next Page
Loading...
Need help?
General
