09. Press the right cursor key to move the cursor one step to the right, and select “0” by
turning the DATA wheel.
To enter numeric values, numerically, use the DATA wheel.
10. Press the right cursor key to move the cursor one step to the right, and select “1” by
turning the DATA wheel.
11. Press the RIGHT cursor key to move the cursor to the right, and press the LEFT cursor
key four times holding the [SHIFT] key.
The [SHIFT] + LEFT cursor keys delete selected letters.
Now “Bass 01” is entered instead of “Sequence 01”.
12. Press [F5] (ENTER) to confirm the entry and close the window.
Pressing [F4] (CANCEL) cancels the entry and closes the window. In this case, the name does not change.
Other useful functions in the Name window
Copy and Paste function
With the copy and paste function, you can copy the letters in the “New name” field and paste to set a name to
another data. This is useful when you wish to create similar names for different data.
If you press [F2] (COPY ) key when Name window is open, the letters in the “New name” field will be copied
(temporarily saved). When you press [F3] (PASTE) in the Name window , those copied letters can be pasted to
the “New name" field.
Entering numbers with NUMERIC key
In the value fields such as the sample’s TRIM page, you can enter numbers directly by using the [NUMERIC]
key.
01. Press the [NUMERIC] key on an available field.
The key’s LED will blink and allows you to enter numbers using the pad.
02. Enter numbers by hitting the corresponding pads.
The number indicated on the upper right corner of the pad is entered. Pad 1 through 9 corresponds number 1
to 9 and Pad 10 corresponds to number 0.
When you enter the wrong number, hit Pad 16. The number is canceled and you can enter the correct
number.
03. Hit Pad 12.
That confirms your entry.
When you set the Time field, you can change the unit (digit) by hitting Pad 11.
In fields where you can set +/-, you can switch + and – by hitting Pad 13.
To Next Page
Loading...
Need help?
General
