Chapter 8 : Q-Link slider 44
Setting the slider 44
Recording the slider value in a sequence 44
AFTER key 44
Chapter 9 : Using the MPC1000 with external devices 45
Sync with the MPC1000 as the master 45
Sync with the MPC1000 as the slave 45
Connecting the MPC1000 to the MIDI keyboard with the sound module 46
Setting the MIDI input 47
Chapter 10 : Recording a sample 48
Recording the sample - detailed information 50
Recording the digital signal 50
Recording the MAIN OUT 50
Other features 51
Chapter 11 : Editing a sample 52
Setting the start/end points for the sample 52
Deleting an unnecessary part from a sample (DISCARD) 53
Saving part of a sample as a new sample (EXTRACT) 54
Sample window features 54
Other editing functions 55
Setting the loop 56
Linking the loop point to the start point 57
Chapter 12 : Program 58
Creating a program 58
Assigning/Reassigning samples to the pads 58
Playing the sample while the pad is being hit 59
Setting the volume and the tuning for a sample 59
Changing the sample volume with velocity 59
Playing several samples with one pad 60
Switching between samples using velocity 60
Setting the envelope for a pad 61
The functions in the Program window 61
Editing the sound of a sample 63
Simulating the open/close hi-hat (setting the mute group) 64
Setting the overlap of the sounds on the same pad (voice overlap) 64
Delete all the unused samples at the same time (PURGE) 64
Setting a MIDI note number to the pads 65
Assigning MIDI note numbers to the pads (changeing the default setting) 66
To Next Page
Loading...
Need help?
General
