EasyManuals Logo

Akuvox A02 Administrator's Guide

Akuvox A02
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Akuvox A02 Access Control Terminal Admin Guide
www.akuvox.com
19
9 Network Setting
You can configure the default DHCP mode (Dynamic Host Configuration Protocol) and
static IP connection. Moreover, you can set up an IP address, Subnet Mask, Default
Gateway, and DNS servers. To configure the configuration on web Network > Basic > LAN
Port interface.
Parameter Set-up:
DHCP: select the DHCP mode by checking off the DHCP box. DHCP mode is the
default network connection. If the DHCP mode is selected, then the access control
terminal will be assigned by the DHCP server with IP address, subnet mask, default
gateway, and DNS server address automatically.
Static IP: select the static IP mode by checking off the Static IP check box. When
static IP mode is selected, then the IP address, subnet mask, default gateway, and
DNS servers address must be manually configured according to your actual network
environment.
IP Address: set up the IP Address if the static IP mode is selected.
Subnet Mask: set up the subnet mask according to your actual network environment.
Default Gateway: set up the correct gateway default gateway according to the IP
address of the default gateway.
Preferred/Alternate DNS: set up DNS1/ DNS2 (Domain Name Server) according to
your actual network environment. DNS1 is the primary DNS server address while the
DNS2 is the secondary server address, and the access control terminal connects to
the DNS2 server when the primary DNS server isunavailable.

Other manuals for Akuvox A02

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akuvox A02 and is the answer not in the manual?

Akuvox A02 Specifications

General IconGeneral
InterfaceEthernet
Case design-
Event capacity100000
Number of users20000 user(s)
Card holders quantity20000
Maximum number of doors1 door(s)
Supported network protocolsIPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP
Ethernet LAN data rates10, 100 Mbit/s
DC voltage range12 V
Power consumption600 mA
Ethernet LAN (RJ-45) ports1
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)-20 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth33 mm
Width86 mm

Related product manuals