Akuvox A02 Administrator's Guide

Akuvox A02 Access Control Terminal Admin Guide
www.akuvox.com
31
Parameter Set-up:
• Code: input the private code (the code should contain 2-8digits).
After the configuration, the PIN will be displayed on the user interface.
12.6 Unlock by Public Code
A02 supports public pin codes for administrators or cleaners to open the door. You can set
up a public PIN code on Access Control > Relay > Public PIN interface.
Parameter Set-up:
• Enabled: click the checkbox to enable the public pin code.
• PIN Code: input the public pin code (the code should contain 2-8 digits).

Akuvox A02 Specifications

General

Interface	Ethernet
Case design	-
Event capacity	100000
Number of users	20000 user(s)
Card holders quantity	20000
Maximum number of doors	1 door(s)
Supported network protocols	IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP
Ethernet LAN data rates	10, 100 Mbit/s
DC voltage range	12 V
Power consumption	600 mA
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-20 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	33 mm
Width	86 mm