Akuvox A02 Administrator's Guide

About This Manual
Thank you for choosing the Akuvox A02 access control terminal. This manual is intended
for the administrators who need to properly configure the access control terminal. This
manual is written based on firmware version: 101.30.4.10, and it provides all the
configurations for the functions and features of A01, A02, and A03 access control
terminals. Please visit the Akuvox forum or consult technical support for any new
information or the latest firmware.

Akuvox A02 Specifications

General

Interface	Ethernet
Case design	-
Event capacity	100000
Number of users	20000 user(s)
Card holders quantity	20000
Maximum number of doors	1 door(s)
Supported network protocols	IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP
Ethernet LAN data rates	10, 100 Mbit/s
DC voltage range	12 V
Power consumption	600 mA
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-20 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	33 mm
Width	86 mm