Akuvox R28 Series Admin Guide

R28A/V
Admin Guide
2.3. Unlock
2.3.1. Unlock by PIN Codes
Press # PIN Code # to unlock, then visitors will hear “The door is
now opened” and the screen will show “Unlock”. If visitors input
the wrong PIN code, the screen will show “Incorrect PIN”.
2.3.2. Unlock by RF cards
The Building-in card reader supports 13.56MHz and 125kHz
RFID-Card .
Place a registered card on RF area to unlock., then visitors will
hear “The door is now opened” and the screen will show
“Unlock”. If the card has not been registered, the phone will
show “Invalid Card”.
2.3.3. Unlock by DTMF codes
During the calling, the Occupants can press the predefined
DTMF codes to remote unlock the door. then visitors will hear
“The door is now opened” and the screen will show “Unlock”.
Figure 2.3.1-1 Unlock interface
Figure 2.3.1-2 Unlock failed interface

Akuvox R28 Series Specifications

General

Brand	Akuvox
Model	R28 Series
Category	Intercom System
Language	English