Akuvox R28 Series Admin Guide

R28A/V
Admin Guide
4.Advanced Features
4.1Advanced Display
4.1.1LED
Go to Intercom - LED Setting to configure.
Users can control three parts’ LED, screen, keypad and card
area. Users can also setup the valid time. For example, start
time from 18 to 23 means the LED will light up from 6pm to
11pm.
4.1.2.IR LED
Go to Intercom - Advanced to configure.
Photoresistor: The setting is for night vision, when the
surrounding of R28 is very dark, infrared LED will turn on and
R28 will turn to night mode.
Photoresistor value relates to light intensity and larger value
means that light intensity is smaller.
Figure 4.1.2 IR LED
Figure 4.1.1 LED

Akuvox R28 Series Specifications

General

Brand	Akuvox
Model	R28 Series
Category	Intercom System
Language	English