Akuvox R28 Series - Action; Action Parameters

R28A/V
Admin Guide
4.5.Action
R28 supports to send notifications, snapshots via email and ftp
transfer method, or calls via sip call method, when trigger
specific actions.
4.5.1.Action Parameters
Go to Intercom - Action to set action receiver.
Email Notification
Sender’s email address: To configure email address of sender.
Receiver’s email address: To configure email address of receiver.
SMTP server address: To configure SMTP server address of
sender.
SMTP user name: To configure user namer of SMTP service
(usually it is same with sender’s email address).
SMTP password: To configure password of SMTP service (usually
it is the same with the password of sender’s email).
Email subject: To configure subject of email.
Email content: To configure content of email.
Figure 4.5.1 Email notification parameters