Akuvox R28 Series - Password Modification; Admin Password Settings on R28; Modify the Device Service Code

R28A/V
Admin Guide
administrator’s user name and password are shown below:
User Name: admin
Password: admin
Note: The recomended browser is Google Chrome.
3.3.Password Modification
3.3.1.Admin Password Settings on R28
Go to Settings - Admin Settings - Admin Password Setting on
R28,to modify Admin Password on R28.
3.3.2.Modify the Device Service Code
Service code is used to enter user interface. The default code is
3888.
Press “*2396#” to enter administrator interface. Press “2” and “3” to
enter service code setting interface to input a 4-digit new user code,
and press “Dial key” to save.
Figure 3.3.3 Web Password Modify