Akuvox R28 Series - Call Event; Input Interface Triggered Action

R28A/V
Admin Guide
No Answer Action: For sending the notification to specified
email if the call is not answered.
4.5.3.Call Event
Go to Intercom - Basic to configure.
Action to execute: To choose suitable way to receive message
or snapshot when dialing out.
HTTP URL: If users choose HTTP mode, enter the URL format:
http://http server IP address/any information.
4.5.4.Input Interface Triggered Action
Go to Intercom - Input to configure.
Action to execute: To choose which action to execute after
triggering.
Http URL: To configure URL, if HTTP action is chosen.
Action Delay: To configure after how long to execute to send
out notifications and trigger relay.
Open relay: To configure which relay to trigger.
Figure 4.5.3 Call event
Figure 4.5.4 Input interface triggered action