3.6.Security
2.6.1.Live view
Go to Intercom - Live Stream to check the real-time video from
R28.
2.6.2.RTSP
R28 supports RTSP stream, go to Intercom - RTSP to enable or
disable RTSP server. The URL for RTSP stream is:
rtsp://IP_address/live/ch00_0.
RTSP Stream: To enable RTSP video and select the video
codec. R28 supports H.264 video codec by default.
H.264 Video Parameters: H.264 is a video stream compression
standard. Different from H.263, it provides an approximately
identical level of video stream quality but a half bit rate. This type
of compression is sometimes called MPEG-4 part 10. To modify
the resolution, framerate and bitrate of H.264.
MPEG4 Video Parameters: MPEG4 is one of the network video
To Next Page
Loading...
Need help?
General
