Akuvox SP-R5xP User Manual

Administrator’s Guide for Akuvox SP-R5xP IP Phones
Akuvox Proprietary and Confidential. Copyright © 2014 Akuvox network Co., Ltd..
Page 36 of 221
Phone User Interface
Configure the way for the IP phone to check
for configuration files.
Working Principle and Functions
A complete automatic upgrade process consists of the following:
1． Administrator sets up the NPS and ACS servers with the required information.
2
．
IP phone gets the URL of the configuration file server
3
．
IP phone download the configuration file from the configuration server with URL
obtained in step 2.
4． The configuration parameters in the configuration file are written to the appropriate
configuration files in the IP phone
5． If configuration file contains the content for upgrading the firmware, IP phone will
get the firmware and do a firmware update.
Obtaining the update server URL
When an IP Phone power on, it will try to obtain the upgrade server address in the
following order: PnP Server -> User Specified Server -> Dhcp Custom Option-> Dhcp
Option66-> Dhcp Option43. You can use any one of the above methods to setup the auto
provisioning.
To set up the auto provisioning, use the web interface on the IP Phone. The following is a
detailed description of the process. The auto provisioning setup is under "Upgrade ->
Advanced" on the IP Phone web page.

Akuvox SP-R5xP Specifications

General

Brand	Akuvox
Model	SP-R5xP
Category	IP Phone
Language	English