Alcatel-Lucent 7750 - Page 297

Command Reference
7750 SR Interface Configuration Guide Page 297
Ethernet Tunnel Commands
config
— eth-tunnel tunnel-id
—no eth-tunnel
— ccm-hold-time {down down-timeout | up up-timeout}
—no ccm-hold-time
— description long-description-string
—no description
— ethernet
— encap-type {dot1q|qinq}
— no encap-type
— [no] mac ieee-address
— hold-time
— member down time
—no member
— lag-emulation
— access
— adapt-qos {distribute | link | port-fair}
—no adapt-qos
— [no] per-fp-ing-queuing
— path-threshold num-paths
—nopath-threshold
— [no] path path-index
— description description-string
—no description
— control-tag vlan-id
—no control-tag
— eth-cfm
— [no] mep
mep-id domain md-index association ma-index
— [no] ccm-enable
— ccm-ltm-priority priority
—no ccm-ltm-priority
— [no] eth-test-enable
— test-pattern {all zeros | all-ones} [crc-enable]
—no test-pattern
— low-priority-defect {allDef | macRemErrXcon | remErrX-
con | errXcon | xcon | noXcon}
— mac-address mac-address
—no mac-address
— [no] control-mep
— [no] shutdown
— member port-id
—no member
— precedence {primary | secondary}
—no precedence
— [no] shutdown
— protection-type {g8031-1to1 | loadsharing}
— revert-time time
—no revert-time
— [no] shutdown