Interfaces
Page 406 7750 SR Interface Configuration Guide
shutdown
Syntax [no] shutdown
Context config>port<port-id>ethernet> efm-oam>link-monitoring>errored-frame
config>port<port-id>ethernet>efm-oam>link-monitoring>errored-frame-period
config>port<port-id>ethernet>efm-oam>link-monitoring>errored-frame-seconds
config>port<port-id>ethernet>efm-oam>link-monitoring>errored-symbols
Description This command enables or disables the local counting, thresholding and actions associated with this type of
local monitor. Peer received errors are not controlled by this command. Reaction to peer messaging is
defined in the peer-rdi-rx hierarchy.
The no form of the command activates the local monitoring function and actions for the event.
Default shutdown
local-sf-action
Syntax local-sf-action
Context config>port>ethernet>efm-oam>link-monitoring
Description The configuration context used to define how crossing the local signal failure threshold (sf-threshold) will
be handled. This includes local actions and if and how to notify the peer that the threshold has been crossed.
event-notification-burst
Syntax event-notification-burst packets
Context config>port>ethernet>efm-oam>link-monitoring>local-sf-action
Description The configuration parameters that define the number of the Event Notification OAM PDU to be send to the
peer if the local signal failure threshold (sf-threshold) has been reached. The sending of the Event Notifica-
tion OAMPDU is configured under the individual monitors.
Interactions: The sf-thresh threshold will trigger these actions.
Parameters packets — The number of Event Notification OAM PDUs to send to a peer when the signal failure threshold
has been reached.
Values [1…5]
Default 1
To Next Page
Loading...
