Interface Configuration
7750 SR Interface Configuration Guide Page 453
Parameters pattern — Specifies an integer taking the following values:
Values 0 — 255
shutdown
Syntax [no] shutdown
Context config>port>ml-bundle>ima>test-pattern-procedure
Description This command enables a configured IMA test pattern procedure.
The no form of this command disables the IMA test pattern procedure.
version
Syntax version IMA-version
no version
Context config>port>ml-bundle>ima>
Description This command configures the IMA version for the multilink bundle group. If there is a version mismatch
between this IMA group and the far end IMA group, the IMA group will become operationally down. Auto-
matic version changing is not supported. To change the IMA version, all member links must be removed
from the group first.
Default 1-1
Parameters IMA-version — Specifies the IMA version for this group.
Values 1-0 — IMA version 1-0
1-1 — IMA version 1-1
To Next Page
Loading...
