Interface Configuration
7750 SR Interface Configuration Guide Page 471
before polling begins.
Values 0 — 255
protocol
Syntax protocol protocol-type
no protocol
Context config>port>sonet-sdh>path>atm>ilmi
Description This command configures the protocol.
Parameters protocol-type — The protocol-type is an enumerated integer whose value indicates the ILMI version of
either 3.1 or 4.0 that is advertised by IME and also indicates the ILMI IME type of either user-side or
network-side.
Values 4_0-user, 4_0-network. 3_1-user, 3_1-network
To Next Page
Loading...
