Interface Configuration
7750 SR Interface Configuration Guide Page 549
interval
Syntax interval interval
no interval
Context config>redundancy>mc>peer>mcr>node>cv
Description This command specifies the polling interval of the ring-node connectivity verification of this ring node.
Default 5
Parameters interval — Specifies the polling interval, in minutes.
Values 1 — 6000
service-id
Syntax service-id service-id
no service-id
Context config>redundancy>mc>peer>mcr>node>cv
Description This command specifies the service ID of the SAP used for the ring-node connectivity verification of this
ring node.
Default no service-id
Parameters service-id — Specifies the service ID of the SAP.
Values 1 — 2147483647
Values service-id: 1 — 2147483647
src-ip
Syntax src-ip ip-address
no src-ip
Context config>redundancy>mc>peer>mcr>node>cv
Description This command specifies the source IP address used in the ring-node connectivity verification of this ring
node.
Default no src-ip
Parameters ip-address — Specifies the source IP address.
To Next Page
Loading...
