Alcatel-Lucent 7750 - Page 602

Interfaces
Page 602 7750 SR Interface Configuration Guide
evc
Syntax evc [port-id [vlan vlan-id]]
Context show>elmi
Description This command displays Ethernet Virtual Connections (EVC). No argument displays all the EVC on the
service router. The port and VLAN arguments display information related to EVC associated with the port
and VLAN.
Parameters port-id — Displays information related to the EVCs configured on the port
Values slot/mda/port
vlan vlan-id — Specifies the VLAN Identifier of the EVC.
Values 0 — 4094, *
Sample Output
*A:Dut-C# show elmi evc
===============================================================================
ELMI EVC Table
===============================================================================
Port Vlan Status Type Evc Id
-------------------------------------------------------------------------------
1/1/1 10 New-Act P2p EVC11110
1/1/3 30 New-Act P2p EVC11220
1/1/5 100 Act P2p EVC115100
1/1/5 200 Act P2p EVC115200
-------------------------------------------------------------------------------
Number of Evcs : 4
===============================================================================
*A:Dut-C#
A:Dut-C# show elmi evc 1/1/5
===============================================================================
ELMI EVC Table
===============================================================================
Port Vlan Status Type Evc Id
-------------------------------------------------------------------------------
1/1/5 100 Act P2p EVC115100
1/1/5 200 Act P2p EVC115200
-------------------------------------------------------------------------------
Tx Check Time Last time when a status eLMI check message was sent by UNI-N.
Tx Async Status
Msg
Counter for single EVC asynchronous status messages sent by UNI-N.
Discard Msg Counter for the status enquiry messages discarded due to errors.
Field Description