Alcatel-Lucent 7750 - Page 644

Interfaces
Page 644 7750 SR Interface Configuration Guide
DDM Events
Enabled — DDM events are enabled
Disabled — DDM events are disabled
Configured Mode
network — The port is configured for transport network use.
access — The port is configured for service access.
Dot1Q Ethertype
Indicates the Ethertype expected when the port's encapsulation type is
Dot1Q.
QinQ Ethertype
Indicates the Ethertype expected when the port's encapsulation type is QinQ.
Net. Egr. Queue
Pol
Specifies the network egress queue policy or that the default policy is used.
Encap Type
Null — Ingress frames will not use any tags or labels to delineate a
service.
dot1q — Ingress frames carry 802.1Q tags where each tag signifies a
different service.
Active Alarms
The number of alarms outstanding on this port.
Auto-negotiate
True — The link attempts to automatically negotiate the link speed and
duplex parameters.
False — The duplex and speed values are used for the link.
Alarm State
The current alarm state of the port.
Collect Stats
Enabled — The collection of accounting and statistical data for the
network Ethernet port is enabled. When applying accounting policies the
data by default will be collected in the appropriate records and written to the
designated billing file.
Disabled — Collection is disabled. Statistics are still accumulated by the
IOM cards, however, the CPU will not obtain the results and write them to
the billing file.
Egress Rate
The maximum amount of egress bandwidth (in kilobits per second) that this
Ethernet interface can generate.
Egress Buf (Acc)
The access-buffer policy for the egress buffer.
Egress Buf (Net)
The network-buffer policy for the egress buffer.
Egress Pool Size
The amount of egress buffer space, expressed as a percentage of the
available buffer space that will be allocated to the port or channel for egress
buffering.
Ingress Buf
(Acc)
The access-buffer policy for the ingress buffer.
Label Description (Continued)