Interface Configuration
7750 SR Interface Configuration Guide Page 645
Ingress Pool
Size
The amount of ingress buffer space, expressed as a percentage of the
available buffer space that will be allocated to the port or channel for ingress
buffering.
OTU
OTU encapsulation status.
Configured
Address
The base chassis Ethernet MAC address.
Hardware Address The interface's hardware or system assigned MAC address at its
protocol sub-layer.
Transceiver Type Type of the transceiver.
Model Number The model number of the transceiver.
Transceiver Code The code for the transmission media.
Laser Wavelength The light wavelength transmitted by the transceiver's laser.
Connector Code The vendor organizationally unique identifier field (OUI)
contains the IEEE company identifier for the vendor.
Diag Capable Indicates if the transceiver is capable of doing diagnostics.
Vendor OUI The vendor-specific identifier field (OUI) contains the IEEE company
identifier for the vendor.
Manufacture date The manufacturing date of the hardware component in the mmddyyyy
ASCII format.
Media The media supported for the SFP.
Serial Number The vendor serial number of the hardware component.
Part Number The vendor part number contains ASCII characters, defining the vendor part
number or product name.
Input/Output When the collection of accounting and statistical data is enabled, then octet,
packet, and error statistics are displayed.
Description A text description of the port.
Interface
The port ID displayed in the slot/mda/port format.
Speed
The speed of the interface
Link-level
Ethernet — The port is configured as Ethernet.
SONET — The port is configured as SONET-SDH
MTU
The size of the largest packet which can be sent/received on the Ethernet
physical interface, specified in octets.
Label Description (Continued)
To Next Page
Loading...
