Alcatel-Lucent 7750 - Page 646

Interfaces
Page 646 7750 SR Interface Configuration Guide
Admin State
Up — The port is administratively up.
Down — The port is administratively down.
Oper State
Up — The port is operationally up.
Down — The port is operationally down.
Duplex
Full — The link is set to full duplex mode.
Half — The link is set to half duplex mode.
Hold time up
The link up dampening time in seconds. The port link dampening timer
value which reduces the number of link transitions reported to upper layer
protocols.
Hold time down
The link down dampening time in seconds. The down timer controls the
dampening timer for link down transitions.
IfIndex
Displays the interface's index number which reflects its initialization
sequence.
Phy Link
Yes — A physical link is present.
No — A physical link is not present.
Configured Mode
network — The port is configured for transport network use.
access — The port is configured for service access.
Network Qos Pol
The network QoS policy ID applied to the port.
Encap Type
Null — Ingress frames will not use any tags or labels to delineate a
service.
dot1q — Ingress frames carry 802.1Q tags where each tag signifies a
different service.
Active Alarms
The number of alarms outstanding on this port.
Auto-negotiate
True — The link attempts to automatically negotiate the link speed and
duplex parameters.
False — The duplex and speed values are used for the link.
Alarm State
The current alarm state of the port.
Collect Stats
Enabled — The collection of accounting and statistical data for the
network Ethernet port is enabled. When applying accounting policies the
data by default will be collected in the appropriate records and written to the
designated billing file.
Label Description (Continued)