Alcatel-Lucent 7750 - Page 647

Interface Configuration
7750 SR Interface Configuration Guide Page 647
Disabled — Collection is disabled. Statistics are still accumulated by the
IOM cards, however, the CPU will not obtain the results and write them to
the billing file.
Down-When-Looped
Shows whether the feature is enabled or disabled.
Egress Buf (Acc)
The access-buffer policy for the egress buffer.
Egress Buf (Net)
The network-buffer policy for the egress buffer.
Ingress Buf
(Acc)
The access-buffer policy for the ingress buffer.
Ingress Pool
Size
The amount of ingress buffer space, expressed as a percentage of the
available buffer space, that will be allocated to the port or channel for
ingress buffering.
Configured
Address
The base chassis Ethernet MAC address.
Hardware Address
The interface's hardware or system assigned MAC address at its
protocol sub-layer.
Errors Input/
Output
For packet-oriented interfaces, the number of inbound packets that
contained errors preventing them from being deliverable to a higher-layer
protocol. For character-oriented or fixed-length interfaces, the number of
inbound transmission units that contained errors preventing them from being
deliverable to a higher-layer protocol.
For packet-oriented interfaces, the number of outbound packets that could
not be transmitted because of errors. For character-oriented or fixed-length
interfaces, the number of outbound transmission units that could not be
transmitted because of errors.
Unicast Packets
Input/Output
The number of packets, delivered by this sub-layer to a higher (sub-) layer,
which were not addressed to a multicast or broadcast address at this sub-
layer. The total number of packets that higher-level protocols requested be
transmitted, and which were not addressed to a multicast or broadcast
address at this sub-layer, including those that were discarded or not sent.
Multicast Pack-
ets Input/Output
The number of packets, delivered by this sub-layer to a higher (sub-) layer,
which were addressed to a multicast address at this sub-layer. For a MAC
layer protocol, this includes both group and functional addresses. The total
number of packets that higher-level protocols requested be transmitted, and
which were addressed to a multicast address at this sub-layer, including
those that were discarded or not sent. For a MAC layer protocol, this
includes both Group and Functional addresses.
Label Description (Continued)