Interface Configuration
7750 SR Interface Configuration Guide Page 725
ppp
Syntax ppp [multiclass]
Context show>multilink-bundle
Description This command enables the context to display PPP group data.
MDA Values 1, 2
multiclass
Specifies to display multi-class MLPPP information.
Sample Output
A:timetra-sim110# show multilink-bundle bundle-ppp-1/1.1 ppp
===============================================================================
PPP Protocols for bundle-ppp-1/1.1
===============================================================================
Protocol State Last Change Restart Count Last Cleared
-------------------------------------------------------------------------------
ipcp initial 02/16/2007 06:11:44 0 02/16/2007 06:11:44
mplscp initial 02/16/2007 06:11:44 0 02/16/2007 06:11:44
bcp initial 02/16/2007 06:11:44 0 02/16/2007 06:11:44
osicp initial 02/16/2007 06:11:44 0 02/16/2007 06:11:44
ipv6cp initial 02/16/2007 06:11:44 0 02/16/2007 06:11:44
===============================================================================
Local Mac address : 8c:6e:01:01:00:3d Remote Mac address : 00:00:00:00:00:00
Local IPv4 address : 0.0.0.0 Remote IPv4 address: 0.0.0.0
Local IPv6 address : ::
Remote IPv6 address: ::
===============================================================================
*A:mlppp_top#
*A:mlppp_top# show multilink-bundle bundle-ppp-1/1.1 ppp multiclass
===============================================================================
MLPPP Per Class Traffic Statistics for bundle-ppp-1/1.1
===============================================================================
Input Output
-------------------------------------------------------------------------------
Class 0
Octets 0 0
Packets 0 0
Errors 0 0
Class 1
Octets 0 0
Packets 0 0
Errors 0 0
Class 2
Packets 0 0
Errors 0 0
Class 3
Octets 0 270400
Packets 0 2704
Errors 0 0
===============================================================================