Alcatel-Lucent 7750 - Page 726

Interfaces
Page 726 7750 SR Interface Configuration Guide
*A:mlppp_top#
atm
Syntax atm [detail]
Context show>multilink-bundle>ima
Description This command displays multilink bundle IMA ATM information.
Parameters detail — Displays detailed information.
Output Show Mutlilink-bundle IMA ATM Output — The following table describes show multilink-bundle
IMA ATM output fields..
Mutlilink-Bundle IMA ATM Output Field s Sample Output
A:NS052651098# show multilink-bundle bundle-ima-1/1.1 ima atm
=============================================================================
ATM Info for bundle-ima-1/1.1
=============================================================================
Cell Mode : UNI Mapping : Direct
Configured VCs : 1 Configured VPs : 0
Configured VTs : 0 Configured IFCs : 0
Configured minimum VPI: 0
Last Unknown VPI/VCI : none
===============================================================================
ATM Bandwidth Info
===============================================================================
kbps % kbps %
-------------------------------------------------------------------------------
Ingress CBR : 15232 100% Egress CBR : 15232 100%
Ingress RT-VBR : 0 0% Egress RT-VBR : 0 0%
Ingress NRT-VBR : 0 0% Egress NRT-VBR : 0 0%
Ingress UBR : 0 0% Egress UBR : 0 0%
Label Description
Cell Mode
Displays the cell format (UNI or NNI) used on the ATM interface.
Configured VCs
Displays the number of configured VCs.
Configured VTs
Displays the number of configured VTs.
Configured mini-
mum VPI
Displays the minimum VPI configured for this bundle.
Last Unknown
VPI/VCI
Indicates the last unknown VPI/VCI that was received on this
interface.
Mapping
Displays ATM cell mapping used on this interface: Direct or PLCP.
Configured VPs
Displays the number of configured VPs.
Configured IFCs
Displays the number of configured IFCs.