Interface Configuration
7750 SR Interface Configuration Guide Page 727
-------------------------------------------------------------------------------
Ingress Total : 15232 100% Egress Total : 15232 100%
ATM Link Bandwidth : 15232 kbps
Shaped Bandwidth : 15232 kbps
===============================================================================
connections
Syntax connections
Context show>multilink-bundle>ima>atm
Description This command displays connection information.
Parameters pvc — Displays ATM port PVC information.
pvp — Displays ATM port PVP information.
pvt — Displays ATM port PVT information.
vpi-range — Displays the VPI range.
Values vpi: 0 — 4095 (NNI)
0 — 255 (UNI)
vpi — Displays the VPI values.
Values vpi: 0 — 4095 (NNI)
0 — 255 (UNI)
vci: — Displays the VCI values.
Values 1, 2, 5 — 65534
detail — Provides detailed information.
MDA Values 1, 2
Output Show Mutlilink-bundle IMA ATM Connections Output — The following table describes show
multilink-bundle IMA ATM connections output fields.
Label Description
Owner
Identifies the system entity that owns a specific ATM connection.
Type
Specifies the type of this multilink bundle.
mlppp — Indicates that the bundle is of type MLPPP.
ima — Indicates that the bundle is of type IMA group.
Ing.TD
Specifies the ATM traffic descriptor profile that applies to the receive
direction of the interface connection.
Egr.TD
Specifies the ATM traffic descriptor profile that applies to the transmit
direction of the interface connection.
Adm
ima — Indicates that the bundle is of type IMA group.