Alcatel-Lucent 7750 - Page 734

Interfaces
Page 734 7750 SR Interface Configuration Guide
LAG Show Commands
lag
Syntax lag [lag-id] [detail] [statistics]
lag [lag-id] description
lag [lag-id] port
lag lag-id associations
lag lag-id bfd
lag lag-id [detail] eth-cfm [tunnel tunnel-id]
lag lag-id associations per-link-hash interface [class {1 | 2 | 3}]
lag lag-id associations link-map-profile [link-map-profile] interface
lag lag-id lacp-partner
lag lag-id detail lacp-partner
lag lag-id link-map-profile link-map-profile
lag lag-id associations per-link-hash sap [class {1 | 2 | 3}]
lag lag-id associations link-map-profile [link-map-profile] sap
lag lag-id per-link-hash [class {1 | 2 | 3}]
lag lag-id per-link-hash port port-id
Context
show
Description This command displays Link Aggregation Group (LAG) information.
If no command line options are specified, a summary listing of all LAGs is displayed.
Parameters lag-id — Displays only information on the specified LAG ID.
Default Display information for all LAG IDs.
Values 1 — 800 (7750 SR-a4/8: 1 — 200; 7750 SR-c12/4: 1 — 64)
detail — Displays detailed LAG information.
Default Displays summary information.
statistics — Displays LAG statistics information.
associations — Displays a list of current router interfaces to which the LAG is assigned.
link-map-profile link-map-profile — Displays information about a particular LAG link map profile.
eth-cfm — Displays a list of Ethernet tunnels to which the LAG is assigned.
per-link-hash — Displays information about a SAP or interface associated with this LAG will send traffic
over a single link of a LAG auto-rebalancing as links are added and removed from this LAG.
lacp-partner — Displays LACP partner information.
link-map-profile link-map-profile — Displays information about a specified LAG link map profile
identifier.