Alcatel-Lucent 7750 - Page 737

Interface Configuration
7750 SR Interface Configuration Guide Page 737
Sample Output
A:sr7- show lag 10 detail
===============================================================================
LAG Details
===============================================================================
Description : N/A
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id : 10 Mode : network
Mode
LAG in access or network mode.
Opr
Up — The LAG is operationally up.
Down — The LAG is operationally down.
Port Threshold
Configured port threshold.
Thres. Exceeded
Cnt
The number of times that the drop count was reached.
Threshold Action
Action to take when the number of available links is equal or below the
port threshold.
Encap Type
The encapsulation method used to distinguish customer traffic on a
LAG.
Lag-IFIndex
A box-wide unique number assigned to this interface.
Adapt QoS
Displays the configured QoS mode.
Port ID
The specific slot/MDA/port ID.
(LACP) Mode
LACP active or passive mode.
LACP xmit
standby
LACP transmits on standby links enabled / disabled.
Slave-to-partner
Configured enabled/disabled.
Port-id
Displays the member port ID.
Adm
Displays the member port administrative state.
Active/stdby
Indicates that the member port is selected as the active or standby link.
Opr
Indicates that the member port operational state.
Primary
Indicates that the member port is the primary port of the LAG.
Sub-group
Displays the member subgroup where the member port belongs to.
Priority
Displays the member port priority.
Label Description (Continued)