Alcatel-Lucent 7750 - Page 752

Interfaces
Page 752 7750 SR Interface Configuration Guide
Values 1, 2
statistics — Clears statistics for the specified MDA.
port
Syntax port port-id atm pvc [vpi[/vci]] statistics
port port-id atm pvp [vpi] statistics
port port-id atm pvt [vpi1.vpi2] statistics
port port-id atm ilmi statistics
port port-id atm port-connection statistics
port <port-id> phys-state-change-count
port port-id ethernet efm-oam events local | remote
port port-id queue-group qgrp-id [instance instance-id] queue-depth [queue queue-id]
{ingress|egress} [access|network]
port port-id queue-group queue-group-name [access | network] {ingress | egress}
[access|network] [{statistics|associations}]
port port-id statistics
Context clear
Description This command clears port statistics for the specified port(s).
Parameters
port-id — The port identifier.
Values port-id slot[/mda[/port]] or slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps keyword
group-id 1 — 64 (16 for 7750 SR-c12/4)
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 — 336
bpgrp-id bpgrp-<type>-<bpgrp-num>
bpgrp keyword
type ima, ppp
bpgrp-num 1 — 2000 (256 for 7750 SR-c12/4)
statistics — Specifies that port statistics will be cleared.
atm — Specifies that ATM port statistics will be cleared.
ilmi — Clears ILMI information. This parameter is only applicable for ports/bundles that support ILMI.
vpi — Specifies the ATM network virtual path identifier (VPI) for this PVC.
vci — Specifies the ATM network virtual channel identifier (VCI) for this PVC.
slot — The slot number.
Values 1 - 10