Alcatel-Lucent 7750 - Page 753

Interface Configuration
7750 SR Interface Configuration Guide Page 753
mda — The MDA number.
Default All MDAs.
Values 1, 2
7750 SR-c12: 1, 3, 5, 7, 9, 117750 SR-c12: 1-12pvc — Clears PVC statistics.
port-connection — Clears port-connection statistics.
phys-state-change-count — Clears the counter that tracks physical port state transitions for ethernet ports
("Phys State Chng Cnt" in "show port" output, or tmnxPortPhysStateChangeCount in the TIMETRA-
PORT-MIB)
queue-group queue-group-name — Clears the specified port queue group name. It uniquely identifies a
port ingress queue group in the managed system.
ingress — Clears ingress queue group information.
egress — Clears egress queue group information
ethernet — Specifies an Ethernet port will have the clear functions executed
efm-oam — Specifies the efm-oam will experience the cleared
events — specifies an efm-oam event will be cleared
local — only local efm-oam events will be cleared
remote — Only remote (received from peer) events will be cleared. Local and remote is not specified.
Default Without specifying an option, both local and remote are cleared.
Sample Output
A:SR12# clear port 3/1/1 atm
- atm
cp - Clear Connection Profile statistics
ilmi - Clear ILMI statistics
interface-conn* - Clear interface-connection statistics
pvc - Clear PVC statistics
pvp - Clear PVP statistics
pvt - Clear PVT statistics
A:SR12# clear port 3/1/1 atm cp
- cp [<cp>] statistics
<cp> : [1..8000]
<statistics> : keyword
queue-group
Syntax queue-group queue-group-name egress access egress-queue egress-queue-id [interval
seconds] [repeat repeat] [absolute|rate]
Context clear