Interface Configuration
7750 SR Interface Configuration Guide Page 761
005 WTR 0x0f0000 NR 0x0f0101 NR Tx--> Work 000 00:16:26.630
006 RxPdu 0x0f0000 NR 0x0f0000 NR Rx<-- Work 000 00:16:26.630
*A:PE-E#
frame-relay
Syntax frame-relay port-id
Context This command displays frame-relay information.
Parameters port-id — Specifies the physical port ID.
Syntax: slot/mda/port[.channel]
Sample Output
tools dump frame-relay bundle-fr-1/1.1
MLFR info for bundle-fr-1/1.1:
expectedBundleIdStr : "7750-bundle-fr-1/1.1"
bundleId : 1
active/configured : 4/4
adminEnabled : 1
ddDebDownCnt : 10
ddMaxForBundle : 0
fwdId : 0
linkDebugMask : 0
-------- Member Information ---------
1/1/1.1.1.1 PortId = 0x22208056
Internal ID : bundle 1, link 1
Link protocol state : Up
Diff delay state : Yellow
ddRedCnt : 0
ddYellowCnt : 11
Smoothed diff delay : 20 ms.
Historical RTT : 22788, 22756, 22752 us.
Rx LinkId : "1/1/1.1.1.1"
WARNING : dbgDelay=20 ms
LIP CTL Messages : Tx: 136 Rx: 135
Hello Messages : Tx: 121 Rx: 12
Hello Ack Messages : Tx: 12 Rx: 121
AddLink Messages : Tx: 2 Rx: 1
AddLinkAck Messages : Tx: 1 Rx: 1
AddLinkRej Messages : Tx: 0 Rx: 0
1/1/1.1.2.1 PortId = 0x22208077
Internal ID : bundle 1, link 2
Link protocol state : Up
Diff delay state : OK
Smoothed diff delay : 0 ms.
Historical RTT : 2271, 2304, 2309 us.
Rx LinkId : "1/1/1.1.2.1"
LIP CTL Messages : Tx: 136 Rx: 135