Accessories
8AL90399ENAD ed01 111/141
5.2.6.1 Easy pairing
Your device is designed to easy pair with the desk phone. Place the switched-off handset on its
base ('on-hook' position). It will be automatically paired with the desk phone (the handset must be
switched off or in pairing mode).
If the handset is already paired with another desk phone, first unpair the handset with the
previous desk phone, or reset the handset (simultaneously give a long press the Power and
Volume + keys). Then place the handset on its base.
5.2.6.2 Usual pairing
This procedure can be used if the easy pairing option has failed.
1- Put the handset in detectable mode:
• The device is not paired: switch on the device. The device is directly in pairing mode.
2- Set your desk phone to 'discover' the Bluetooth® wireless handset
• Use one of the following:
→
Bluetooth
• Search devices
3- Connect the handset with the desk phone
• Searching for Bluetooth® equipment. Wait for the detected equipment type and
address to be displayed.
• Select the Bluetooth® wireless handset displayed in your desk phone: “ALE-160 BT
Handset”.
• Add the device by selecting the relevant menu on your desk phone: Add.
• If voice prompts are enabled, you hear: “Device connected”. The following message is displayed
on the screen: “Device added”.
The handset is correctly connected if it appears in the list of connected devices on your desk phone.
Press the Line key of the handset to test the connection, your desk phone will prompt you to enter
a number.
Please contact your installer if you encounter any problems. Before contacting your installer make
sure you have information such as the serial number, the date code and the technical reference
that you can find on the battery.
5.2.7 Replace the handset
If the desk phone is locked for pairing with a new connected Bluetooth device, this feature may not
be available.
5.2.7.1 Easy pairing
If you have to replace the handset with a new one, just place the new handset (switched off) on its
base ('on-hook' position). It will be automatically paired with the desk phone.
If the handset is already paired with another desk phone, first unpair the handset with the previous
desk phone, or reset the handset (simultaneously give a long press the Power and Volume + keys).
Then place the handset on its base.
To Next Page
Loading...
