Do more with your desk phone
8AL90399ENAD ed01 75/141
• VPN Authent
→
Use Authentification, User, Password: activate this option if a logon to the VPN
server (username and password) is required. The VPN authentication can be disabled in case
a specific PSK is used for each remote worker.
Validate.
• VPN Pincod
→
Request Pincode on Boot: if this option is activated, the PIN code is required
when you boot your desk phone. We recommend you activate this option.
Validate.
• The VPN configuration is saved and the main menu is displayed.
• Select this icon to exit the configuration menu. The desk phone restarts.
• Enter the PIN code if you have selected the option (Request Pincode on Boot).
• Validate.
• Your desk phone is ready for remote working.
Select this icon to save parameters
Select this icon to return to the main menu.
If you leave the PIN code request menu when the phone is starting, the phone will start without
VPN activated.
If an error occurs when your phone is running in remote mode, a popup is displayed with an error
message. Please note this message to send to your administrator (see chapter: Contacting your
administrator).
3.2.3 Change the configuration
You have to change a parameter of the VPN configuration.
• Access to the administration menu of the desk phone (see chapter below).
• Remote Config
• VPN (scroll down the menu).
• Select a submenu to change the configuration (VPN Config, VPN Tftp, VPN Authent, VPN
Pincod).
• Enter your PIN code (If an administrator password is defined by the system, you can use it to
access to the VPN configuration by selecting: Use Password).
• Validate.
• Change parameters.
• Select this icon to save parameters.
• The VPN configuration is saved and the main menu is displayed.
• Select this icon to exit the configuration menu. The desk phone restarts.
• Enter the PIN code if you have selected the option (Request Pincode on Boot).
• Validate.
• Your desk phone is ready for remote working.
If an error occurs when your phone is running in remote mode, a popup is displayed with an error
message. Please note this message to send to your administrator.