Do more with your desk phone
8AL90399ENAD ed01 82/141
Add new hidden network
A hidden network is generally defined as one that does not broadcast its SSID. You would need
to know the network name (SSID), the type of security, the user name and password in order to
join a hidden network.
• <<Add new network>>: registering a new user network.
• Enter all SSID information: name, authentication type, ID, password, …).
• Check the option (use the down navigation): Hidden network
• Validate.
The new network is added to the network list.
Modify network
• Select the network to modify
(1)
.
• Modify
All information except the name and authentication method can be edited (the password
and the security protocol are hidden, but it is possible to enter new ones).
• Validate.
Remove network
• Select the network to remove
(1)
.
• Remove
• Validate.
Check connection
• Select the network to check
(1)
.
• Check
• Validate to check the connection. The new state is displayed.
• The phone will reboot automatically after checking the connection.
3.3.3.5 Enable or disable the WLAN
You can simply enable/disable the WLAN by disconnecting/connecting the desk phone to Ethernet.
You can also manually enable or disable the WLAN as follows:
• Select the settings icon displayed at the bottom left of the screen during the boot (after
a few seconds)
→
Config. MMI
(1)
→
Network
→
Wireless Network
(2)
• Enable WLAN (depending on the system configuration, an administrator password is
requested to access this menu).
• Press repeatedly until you set the value: Auto or OFF, to activate or deactivate the feature
• Validate.
(1)
A password may be requested, depending on your system configuration. Contact your
administrator for more information (
2)
Depending on your system configuration, the Wireless
Network interface can be hidden by your administrator. Contact your administrator for more
information.
To Next Page
Loading...
