Alcatel OmniPCX Enterprise User Manual

ALC ETL
Alcatel OmniPCX Enterprise
RSI Section - RSI
Maintenance
1
2
5
3
Back-up timer
4
Yes
No
In compliance with the
RSI entity associated with
the call
Back-up address
RSI not enabled
or not monitored
or no strategy allocated
No CSTA or associated
Tserver response
Loss of TServer:
- Single TServer config.
- Dual TServer config.
OmniPCX
switchover
Loss of TServer/
URS link
6
Deactivation and
shutdown of
monitoring for all
RSIs
Loss of all TServers or
CSTA Server
Deactivation and
shutdown of
monitoring of all
RSIs monitored by
this TServer
Deactivation and
shutdown of
monitoring of all
RSIs
CSTA routing services
Any
OmniPCX address
TServer
RSI back-up Adress
Address
managed in the RSI
associated with the
call
Current processing
continues
Current processing lost
Switchover to
TServer 2
Switchover to
TServer 2
High Availaibility Hot
Configuration
High Availaibility Warm
Configuration
2. RSI maintenance commands
Two maintenance commands are u sed for the RSI:
-Pilot2a
- ccdn.
2.1. CSTA Pilot2a
The CSTA tool pilot2a allows (with the set_feature and route_select commands) the routing of
request data to be checked and a routing report t o be obtained.
Enter the command pilot2a -h followedbytheOmniPCXhost.
Enter the command set_feature RSI numb er routing 1.
.40 Ref.3EU19919ENAA Ed.03

Alcatel OmniPCX Enterprise Specifications

General

System Type	IP PBX
VoIP Protocols	SIP, H.323
Voice Codecs	G.711, G.729
Networking	IP
Redundancy	Yes
Unified Communications	Yes
Integrated Applications	Voicemail, Conferencing
Network Interfaces	Ethernet
Humidity	10% non-condensing