134 Rockwell Automation Publication 5069-UM004A-EN-P - April 2019
Chapter 5 Safety Module Features
The following apply to the safety inputs:
• You can connect safety devices, such as Emergency Stop Push Button,
gate switches, and safety light curtains.
• Evaluate an input signal, that is, input data, in single-channel mode or
dual-channel mode.
• An external wiring short circuit check is possible when inputs are wired
in combination with test outputs. The module must be wired in
combination with test outputs when this function is used.
• Independently adjustable on and off delays are available per channel.
The following apply to the test standard outputs:
• Separate test outputs are provided for short circuit detection of a safety
input (or inputs).
• Can supply 24V DC power to devices, such as safety sensors.
• As many as two specific test outputs can be used for broken-wire
detection of a muting lamp.
To Next Page
Loading...
Need help?
General
