Allen-Bradley Kinetix 5500 - Typical Communication Configurations

Rockwell Automation Publication KNX-RM009C-EN-P - May 2019 23
Kinetix 5500 Drive Systems
Kinetix 5500 (400V-class operation) Drives with Kinetix VP Low Inertia Motors
This section provides system combination information for the Kinetix 5500 drives (with 400 and 480V, nominal input)
when matched with Kinetix VP (400V-class) low-inertia motors. Single cable catalog numbers, system performance
specifications, and the optimum torque/speed curves are included.
Bulletin VPL Motor Cable Combinations
Rotary Motor (400V-class)
Cat. No.
Single Cable Cat. No.
(1)
(1) Use 2090-CSxM1DF or 2090-CSxM1DG cables. Cable length xx is in meters, 01 (3.3)…50 (164) in 1.0 m (3.3 ft) increments. Refer to the Kinetix Motion Accessories Technical Data, publication
KNX-TD004
, for cable specifications. For cable configuration illustrations and feature descriptions, by catalog number, refer to 2090-Series Single Motor Cable Overview beginning on page 13.
Feedback Type
VPL-B063xx
2090-CSBM1Dx-18AAxx or
2090-CSWM1Dx-18AAxx (standard, non-flex)
2090-CSBM1Dx-18AFxx (continuous-flex)
Multi-turn or Single-turn
Digital Encoder Feedback
VPL-B0751M, VPL-B0752E, VPL-B0752F, VPL-B0753E, VPL-B0753F
VPL-B1001M, VPL-B1002E,
VPL-B1003C
VPL-B0752M, VPL-B0753M 2090-CSBM1Dx-14AAxx or
2090-CSWM1Dx-14AAxx (standard, non-flex)
2090-CSBM1Dx-14AFxx (continuous-flex)
VPL-B1002M, VPL-B1003F, VPL-B1003T
VPL-B1152C
2090-CSBM1Dx-18AAxx or
2090-CSWM1Dx-18AAxx (standard, non-flex)
2090-CSBM1Dx-18AFxx (continuous-flex)
VPL-B1152F, VPL-B1152T, VPL-B1153E, VPL-B1153F
2090-CSBM1Dx-14AAxx or
2090-CSWM1Dx-14AAxx (standard, non-flex)
2090-CSBM1Dx-14AFxx (continuous-flex)
VPL-B1303x, VPL-B1304x, VPL-B1306x
VPL-B1651C, VPL-B1651F, VPL-B1652C, VPL-B1652F, VPL-B1653C, VPL-B1653D, VPL-B1654B
VPL-B1654D 2090-CSBM1Dx-10AFxx (continuous-flex)
Bulletin VPL Motor Performance Specifications with Kinetix 5500 (400V-class operation) Drives
Motor Cat. No.
Rated Speed
rpm
Speed, max
rpm
System Continuous
Stall Current
A (0-pk)
System Continuous
Stall Torque
N•m (lb•in)
System Peak
Stall Current
A 0-pk
System Peak
Stall Torque
N•m (lb•in)
Motor Rated
Output
kW (Hp)
Kinetix 5500 Drives
(480V AC input)
VPL-B0631T 8000 8000 1.20 0.46 (4.0)
3.50 1.12 (10.0)
0.31 (0.42)
2198-H003-ERSx
4.20 1.33 (12.0) 2198-H008-ERSx
VPL-B0631U 8000 8000 1.92 0.46 (4.0) 6.48 1.33 (12.0) 0.31 (0.42) 2198-H008-ERSx
VPL-B0632F 4600 4600 1.20 0.93 (8.0)
3.50 2.26 (20.0)
0.37 (0.50)
2198-H003-ERSx
4.20 2.69 (24.0) 2198-H008-ERSx
VPL-B0632T 8000 8000 2.55 0.93 (8.0) 8.75 2.69 (24.0) 0.54 (0.72) 2198-H008-ERSx
VPL-B0633M 6500 6700 2.50 1.27 (11.0) 8.75 4.09 (36.0) 0.57 (0.76) 2198-H008-ERSx
VPL-B0633T 6500 8000 3.52 1.27 (11.0)
8.80 2.87 (25.0)
0.57 (0.76)
2198-H008-ERSx
12.60 4.09 (36.0) 2198-H015-ERSx
VPL-B0751M 8000 8000 2.90 1.01 (9.0)
8.80 2.20 (19.0)
0.54 (0.72)
2198-H008-ERSx
9.12 2.27 (20.0) 2198-H015-ERSx
VPL-B0752E 4900 4900 2.70 1.61 (14.0)
8.80 4.10 (36.0)
0.67 (0.90)
2198-H008-ERSx
9.45 4.39 (39.0) 2198-H015-ERSx
VPL-B0752F 7000 7000 3.80 1.61 (14.0) 13.30 4.39 (39.0) 0.80 (1.07) 2198-H015-ERSx
VPL-B0752M 8000 8000 4.90 1.61 (14.0)
17.70 4.10 (36.0)
0.81 (1.09)
2198-H015-ERSx
18.90 4.39 (39.0) 2198-H025-ERSx
VPL-B0753E 4500 4500 3.80 2.28 (20.0) 13.30 7.35 (65.0) 0.81 (1.09) 2198-H015-ERSx