Allen-Bradley Kinetix 5500

To Next Page

To Previous Page

66 Rockwell Automation Publication KNX-RM009C-EN-P - May 2019

Kinetix 5500 Drive Systems

Kinetix 5500 (400V-class operation) Drives with MP-Series Medium Inertia Motors

This section provides system combination information for the Kinetix 5500 drives (with 400 and 480V, nominal input)

when matched with MP-Series (400V-class) medium-inertia motors with absolute high-resolution encoders. Included

are motor power/brake and feedback cable catalog numbers, system performance specifications, and the optimum

torque/speed curves.

Bulletin MPM Motor Cable Combinations

For cable configuration illustrations and feature descriptions, by catalog number, refer to 2090-Series Motor Power/Brake and Feedback Cables Overview beginning on page 14.

Motor-end connector kits are available for motor power/brake and feedback cables. Refer to the Kinetix Motion Accessories Technical Data, publication KNX-TD004

, for more information.

Cable length xx is in meters. Refer to the Kinetix Motion Accessories Technical Data, publication KNX-TD004

, for standard cable lengths.

IMPORTANT These motors require the 2198-H2DCK (series B or later) feedback converter kit.

Rotary Motor (400V-class)

Cat. No.

Motor Power/Brake Cable Motor Feedback Cable

(1)

(1) Use the 2198-H2DCK (series B or later) Hiperface-to-DSL feedback converter kit with flying-lead cables on the drive end. Refer to Required Drive Accessories on page 8.

MPM-B1151x, MPM-B1152x, MPM-B1153E, MPM-B1153F

2090-CPxM7DF-16AAxx (standard, non-flex)

2090-CPxM7DF-16AFxx (continuous-flex)

2090-CFBM7DF-CEAAxx (standard, non-flex)

(2)

2090-CFBM7DF-CEAFxx (continuous-flex)

Absolute High-resolution Feedback

(2) Applies to Kinetix 5500 drives and MPM-B1xxxx-M/S through MPM-B2xxxx-M/S motors with absolute high-resolution feedback.

MPM-B1302F, MPM-B1302M, MPM-B1304C, MPM-B1304E

MPM-B1651C, MPM-B1652C

MPM-B1153T

2090-CPxM7DF-14AAxx (standard, non-flex)