Publication 2711P-UM001B-EN-P
Installing and Replacing Components 5-19
Installing Keypad Legend
Inserts
This section shows how to replace the legend inserts in the PanelView
Plus keypad terminals. The legend strips are available as separate
catalog numbers (2711P-RFKxx) for each keypad terminal, except for
the PanelView Plus 400 terminals (which does not support replaceable
legend strips). One side of the legend strips have the default key
legends and the other side is blank for creating custom legends.
PanelView Plus 600 Terminals
The legend inserts for function keys F1 - F10 are accessible from the
back on the unit and can be replaced with the terminal mounted in
the enclosure.
To replace the F1-F10 function key legends:
1. From the rear of the unit, pull the legend strips out from the
slots on the lower side of the terminal.
2. Slide the new insert into the same slot until only the end tab is
visible.
600 Terminals
AB Drives
To Next Page
Loading...
Need help?
General
