Publication 2711P-UM001B-EN-P
6-16 Terminal Connections
ControlNet Module
PanelView Plus 700-1500 terminals with a ControlNet Communication
Module support communications and the transfer of applications
between devices on a ControlNet network.
Related Information
For more information on ControlNet products, refer to the following
publications.
• ControlNet System Overview (Publication 1786-2.9)
• ControlNet System Planning and Installation Manual (1786-6.2.1)
• ControlNet Cable System Component List (AG-2.2)
The Allen-Bradley website (www.rockwellautomation.com) provides
information and product descriptions of ControlNet products. Under
the Products and Services heading, select Communications.
ControlNet Protocol
The PanelView Plus terminals support release 1.5 of ControlNet.
Unscheduled PLC-5C and ControlLogix messaging and redundant
cabling is supported.
ControlNet allows a flexible control architecture that can work with
multiple processors and up to 99 nodes (via taps) anywhere along the
trunk cable of the network. There is no minimum tap separation and
you can access the ControlNet network from every node (including
adapters).
To Next Page
Loading...
