Publication 2711P-UM001B-EN-P
4-12 Using Configuration Mode
Network Adapters
The Network Adapters screen configures driver settings for all
network adapters installed on the terminal. The only network adapter
on the PanelView Plus terminal is the (IntelR) Fast Ethernet Controller.
Press the Name Servers button and/or IP Address button to access
driver settings.
Name Servers
Defines Name Server addresses for the Network Adapter. These
addresses are automatically assigned if DHCP is enabled for the
network adapter.
Field Description Valid Values
Primary DNS The address of the primary DNS resolver. xxx.xxx.xxx.xxx
Secondary DNS The address of the secondary DNS resolver. xxx.xxx.xxx.xxx
Primary WINS The address of the primary WINS resolver. xxx.xxx.xxx.xxx
Secondary WINS The address of the secondary WINS resolver. xxx.xxx.xxx.xxx
Terminal Settings
Networks and Communications
Network Connections
Network Adapters
Built-in Ethernet Controller
To Next Page
Loading...
Need help?
General
