Rockwell Automation Publication 750-IN100B-EN-P - July 2017 5
Preface
This manual provides procedures for the mechanical and electrical installation
of PowerFlex® 750-Series products with TotalFORCE™ control. This manual
includes the basic steps to transport, position, and join the product enclosures,
to make internal electrical connections, to connect power and the motor, and
to wire basic I/O.
This manual provides instructions for an initial product installation. Assembly
procedures in chapters 1...4 assume that supply power is not connected. Once
the product is connected to a power supply, always verify that system power is
not present before performing any work on the product. See safety-related
practices that are contained in publication NFPA 70E, Standard for Electrical
Safety in the Work Place.
This manual is intended for two types of personnel:
• Qualified personnel familiar with handling heavy equipment.
• Qualified electricians or other personnel who have experience with
electrical terminology, equipment, methods, and safety precautions.
The Additional Resources section is a directory of Rockwell Automation
publications that provide detailed drive information from wiring and
grounding recommendations to troubleshooting and repair.
Additional Resources
The following table lists publications that provide general drive-related
information.
Resource Description
PowerFlex 750-Series Products with TotalFORCE Control
Technical Data, publication 750-TD100
Provides detailed information on:
• Drive and bus supply specifications
• Option specifications
• Fuse and circuit breaker ratings
PowerFlex 755TM IP00 Open Type Kits Technical Data,
publication 750-TD101
Provides detailed information on:
• Kit selection
• Kit ratings and specifications
• Option specifications
PowerFlex 755TM IP00 Open Type Kits Installation
Instructions, publication 750-IN101
Provides instructions to install IP00 Open Type kits in
user-supplied enclosures.
PowerFlex Drives with TotalFORCE Control Programming
Manual, publication 750-PM100
Provides detailed information on:
• I/O, control, and feedback options
• Parameters and programming
• Faults, alarms, and troubleshooting
Drives in Common Bus Configurations with PowerFlex
755TM Bus Supplies Application Techniques, publication
DRIVES-AT005
Provides basic information to properly wire and
ground the following products in common bus
applications:
• PowerFlex 755TM drive system for common bus
solutions
• PowerFlex 750-Series AC and DC input drives
• Kinetix 5700 servo drives
PowerFlex 755T Flux Vector Tuning, publication 750-AT006
Provides guidance on how to tune Flux Vector
position and velocity loops, filters, and other features
to achieve the level of performance that is required
for a given application. This publication is intended
for novice drives users and users with advanced skills.
To Next Page
Loading...
