Alpine Spas SPA POOL - Pre-Fill Procedure

11
Spa Pool Cover Lifter (Optional Extra)
Thecoverlifterneedstobeassembledontothespapool,pleaseseethe
instructionsinthecoverlifterboxandfollowthemcarefully.Twobracketsneedto
besecuredintooppositesidesofthespapoolcabinet.Certainsetupsmayhave
restrictions-seeour‘CoverLifterInstallationGuide’forconrmation.
Downloadthe‘CoverLifterInstallationGuide’fromoursupportpage:
http://alpinespas.co.nz/support/
Steps to Prepare for Filling:
PRE-FILL PROCEDURE
BEFORE FILLING, START HERE!
FAILING TO FOLLOW THIS PROCEDURE MAY RESULT
IN ISSUES STARTING UP THE SPA POOL OR VOIDING WARRANTY.
Checkthesilverplaqueonthe
sideofspapoolcabinet(orsee
yourinvoice)tondyourspapool
model’sname.Seepages34-77
formorespecicinfoaboutyour
spa pool.
Checktheexternaldrainvalve
isinthe‘ow-locked’position
(extended)withtheinnertwistcap
screwedintight.
As the spa pool has been water
testedduringmanufacture,
excesswaterresiduemayhave
splashedoutfromwithinthe
pipesduringtransportandmay
requireaquickwipe.
Openallofthespapooljetsby
turningthemanti-clockwise.This
willallowwatertoowthroughall
pipeswhenllingandhelpavoid
air-locks.
Removethe3M™blueprotective
lmfromthestainlesssteelstrip
thatsurroundstheedgeofthe
acrylic.
1
4
2
3
5