Alpine Spas SPA POOL - Aromatherapy System Usage

79
AROMATHERAPY
Aromatherapy
Anaromatherapysystembuiltintothespapool(selectmodels)utilizestheair
blowertodispersefragrancetothesurfaceofthewaterforyoutoenjoywhile
soaking.
Carefullyfollowtheseinstructionstousethearomatherapyfunction:
Openyouraromatherapy
packetandtakeoutthepacket
offragrancebeadsandwhite
cannister.
Open the aromatherapy cap by
unscrewinganti-clockwise.Place
thecannisterinside.
Remove the cap from the white
cannisterandopenthefragrance
beads.Pourthebeadsintothe
canister.
Ensurethecannistersits
comfortablyinsidelikeso.
Replacethelidonthecannister
tightlybypressingitdown.
Replace the aromatherapy cap by
screwingclockwise.Runtheair
blower from the control panel to
activate the system.
1
4
2
5
3
6
WARNING:
• Do not run the air blower with the aromatherapy cap unscrewed/removed.
• Use only Alpine Spas fragrance beads inside the white cannister.
• Never place anything except for the cannister inside aromatherapy holder.
• Do not pour beads into spa pool or anywhere else except for the white cannister.
Itiscompletelynormalfortheairtofeelcoolwhenyouruntheairblower.Thisis
becausethetemperatureoftheairislowerthanthetemperatureofthewater(and
yourbodytemperature)andwillitfeelcoolerincomparisonwhenittouchesyour
skin.Usetheblowersparingly.