English
164
Other Useful
Features
Setting Interrupt Icon
Display (IN-INT)
The unit can display the icon of the external
device such as a telephone whenever a phone
call comes in to tell you there is a phone call.
Note: After carrying out the steps 1 to 3 of "To
display the initialization mode screen"
described on page 154, perform the
operation show below.
4 2
3
1
Press the SOURCE button.
The main menu appears on the display.
1
Press the 6 (INTLZ) button.
The Initialization mode screen appears.
2
Rotate the rotary encoder and select "IN-INT."
The Function Guide is displayed.
3
Press 1 (TEL) button.
When the external device (telephone) sends the
interrupt signal, the telephone icon appears on
the display.
When the 2 (INT.) button is pressed, the INT
icon appears on the display.
4
TEL
INTLZ
To Next Page
Loading...
