Alpine CVA-1005 - Manual Storing of Station Presets

36
English
Radio Operation
1
23
Tune in a desired radio station you wish to store
in the preset memory by manual or automatic
seek tuning.
Press the FUNC (PAGE 1/2) button.
Press and hold any one of the Function buttons
1 (P.SET1) through 6 (P.SET6) for at least 2
seconds until the Function Guide indicators
P.SET1 through P.SET6 in the display blinks
(for 5 seconds).
2
1
Press the Function button into which you wish
to store the station while the Function Guide
indicators P.SET1 through P.SET6 in the
display are blinking (within 5 seconds).
The Function Guide indicators in the display
stops blinking, indicating that the station has
been memorized at the Function button pressed.
3
PAGE 1/2
Manual Storing of Station
Presets
A total of 24 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
AM or D.A.P.).
4
Repeat the above procedure (1 to 3) to store up
to 5 other stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
Note: If a preset memory has already been
set in the same Function button, it will
be cleared and the new station will be
memorized.
P.SET 1 P.SET 2 P.SET 3 P.SET 4 P.SET 5 P.SET 6
P.SET 1 P.SET 2 P.SET 3 P.SET 4 P.SET 5 P.SET 6