Alpine CVA-1005 - Adjusting Tint of Picture

English
196
Other Useful
Features
2
3
1
Adjusting Tint of Picture
Tint adjustment can be made only in the
navigation, DVD, AUX1 and AUX2 modes.
Tint adjustment cannot be made if a Navigation
system with the RGB feature is connected.
Note: After carrying out the steps 1 to 3 of "To
switch to the display mode screen or to
the picture mode" explained on page
192, perform the operation described
below.
1
Rotate the rotary encoder while the DISPLAY
mode screen is displayed and select "TINT" to
activate the Tint Adjustment mode. The
Function Guide is displayed.
Press the 1 (; GRN) button to adjust green
and press the 3 (RED :) button to adjust red.
To quickly set to the center position, press the
2 (±0) button.
2
GRN ± 0 RED
When the tint adjustment has been completed,
press the FUNC (RETURN) button. The display
returns to the main menu screen.
3
RETURN