EasyManua.ls Logo

Alpine CVA-1005 - Page 176

Alpine CVA-1005
239 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
176
Other Useful
Features
Press the 1 (NAV.) button, the navigation
screen will be displayed and the voice guidance
will be produced on the rear-seat monitor if the
navigation system is connected.
When the 2 (AUX1) button is pressed, the
picture/sound of the device connected to
Terminal AUX 1 will be played on the rear-
seat monitor.
When the 3 (AUX2) button is pressed, the
picture/sound of the device connected to
Terminal AUX 2 will be played on the rear-
seat monitor.
Notes: If a DVD player (DVA-5200) is
connected to the AUX 1 terminal, first
press the FUNC button on the remote
control supplied with the DVD player
(DVA-5200), then carry out steps 1
to 4 on this page. The DVD picture
and sound are output.
If the DVD player (DVA-5205) is
connected to the AUX1 terminal and
the V. OUT button on the remote
control supplied with the DVD player
(DVA-5205) is pressed and held for
more than 2 seconds after having
performed steps 1 to 4 above, the
picture and voice will be produced.
To deactivate the mode, press the
same button.
If no particular picture is selected for
the rear-seat monitor in the AUX OUT
mode, the rear-seat monitor displays
the same picture as for the CVA-1005.
4

Table of Contents

Related product manuals