English
186
Other Useful
Features
4 2 5
3
1
Turning Sound Guide
Function On or Off
The Sound Guide function will give audible
feedback with a beep sound when a button on
the unit is pressed to acknowledge the receipt
of the signal from the button.
Note: After carrying out the steps 1 to 3 of "To
display the initialization mode screen"
described on page 154, perform the
operation show below.
Press the SOURCE button.
The main menu appears on the display.
Press the 6 (INTLZ) button.
The Initialization mode screen appears.
Rotate the rotary encoder and select "BEEP."
The Function Guide is displayed.
Press the 2 (ON) button to activate the Sound
Guide mode. The display shows "BEEP ON."
Press the 1 (OFF) button to deactivate the
Sound Guide mode. The sound guide beep will
not be produced when a button on the unit is
pressed.
OFF ON
INTLZ
When the setting has been completed, press
the FUNC (RETURN) button.
The display returns to the main menu screen.
RETURN
1
2
4
5
3
To Next Page
Loading...
